Spotlight Product: Lowara e-HM Series and AcquaSaver Diversion Valves
The Lowara e-HM range is tailored to your water needs. State of the art hydraulics with best in class efficiency combined with IE3 motors means the lowest operating costs.
Key Features:
- Built to last – No compromise on quality, thick stainless steel construction and highest quality bearings guarantees a long service life
- The motor – The latest technology built into the motor, this means IE3 efficiency standards along with Australian Standard Electrical Certifications ensure safety and efficiency is not compromised.
- The Pump – 30 years of continual product improvement puts the “working end” of the system in a class off it’s own. Hydraulically one of the most efficient pumps you could choose for your pumping application. AS/NZ 4020 compliant
- Whisper quiet – Even when operating at peak demand the noise levels from the e-HM range are very low thanks to the build quality and materials used.
- European Build Quality – Manufactured in Italy, Lowara’s 54 years of engineering quality and product design is respected across the globe.
- Huge range - The perfect solution for most buildings; from family houses up to 10 floor apartment buildings.
For a superior, efficient and cost-effective solution for all of your domestic watering needs, why not consider pairing a Lowara e-HM with an AcquaSaver or pump controller.
The AcquaSaver Valve is a fully automatic mechanical rainwater/mains water changeover device designed for pressure pump supply systems for harvesting rainwater for the toilet, laundry and household applications with automatic mains backup.
Key Features:
- Australian made and easy to install
- Watermark approved to ATS/NZS 5200.477
- Does not require regular maintenance
- No electrical consumption - No electronic components
- Solid brass construction - Fully weatherproof - Built to last
- Suitable for any pressure pump with sufficient head pressure
- Can be mounted in any position
- Built-in dual check valve for backflow prevention
- Available in two sizes: 20mm and 25mm
To find out more about AcquaSaver, click on the images below:
The PresFlo electronic pressure flow regulator starts/stops the pump based on demand. It is capable of satisfying the most varied of needs while guaranteeing the pump works reliably and safely. It substitutes a traditional pressure switch/surge tank system while offering reduced dimensions, no maintenance requirements, constant flow and pump protection.
Key Features:
- Spring loaded water accumulator guarantees high level of protection against over pressure and preventing excessive running and stopping. No need to fit air expansion tanks
- Body with built in check valve. Sturdy, techno polymer body, suitable for use in drinking water distribution systems
- Ease of use and monitoring through flashing LEDS and built in pressure gauge
- Tropicalised circuit board assures complete protection against moisture
- Systems protection against dry running and excessively frequent starts
- Available in 1.5 bar and 2.0 bar start pressure models
- Shuts down flow rate of 2 litres per minute.
Click on the image below for more information on our range of pump controllers or the complete Lowara e-HM domestic Pressure System.
